Angled Cold Trap
 (1).png)
Product Code : SCL-GC-10327
Angled Cold Trap (N4 format, 34/45 joint) is manufactured and exported by Lab Glassware Manufacturer, a laboratory glassware manufacturer based in Ambala, Haryana, India, in continuous operation since 1982. This borosilicate glass component is used to trap condensable vapours before they reach a vacuum line, pump, receiver or other downstream apparatus, in distillation, solvent-recovery and vacuum-line setups across school, college and research laboratories. Export enquiries for the Angled Cold Trap and related distillation apparatus are regularly received from buyers in Kiribati, Nauru and Tuvalu, across Micronesia and Polynesia and worldwide.
Quick answer: The Angled Cold Trap is an N4-format borosilicate glass trap with a 34/45 joint and an angled design, used to intercept condensable vapours before they reach a vacuum pump or downstream equipment, helping protect that equipment from vapour carryover.
| Feature | Specification |
|---|---|
| Format | N4 angled cold trap |
| Joint | 34/45 |
| Design | Angled, for compact glassware routing |
| Function | Vapour trapping and equipment protection, not a volumetric measuring vessel |
| Manufacturer | Lab Glassware Manufacturer, Ambala, Haryana, India |
Why an Angled Trap Helps Protect Equipment
In a vacuum or distillation setup, condensable vapours that escape past a condenser can carry over into a vacuum pump or receiver, potentially causing contamination or damage over time. An angled cold trap is positioned between the vapour source and the pump or receiver, using its angled design to fit compact glassware layouts while cooling and intercepting these vapours before they travel further downstream. This is a trapping and connection component rather than a volumetric measuring vessel, so it does not carry a calibrated capacity. Exact coolant compatibility, chemical resistance and vacuum suitability for your specific application should be confirmed at enquiry stage.
Frequently Asked Questions
What joint size does the Angled Cold Trap use?
It uses a 34/45 joint for connection with compatible laboratory glassware.
What is this cold trap used for?
It is used to intercept condensable vapours before they reach a vacuum pump, receiver or other downstream apparatus in distillation, solvent-recovery and vacuum-line setups.
Does this trap have a measuring capacity?
No, it is a trapping and connection component rather than a volumetric measuring vessel.
Do you export the Angled Cold Trap outside India?
Yes, the Angled Cold Trap and related distillation apparatus are exported to institutional and distributor buyers outside India, with recent enquiries from Kiribati, Nauru and Tuvalu among other markets. Confirm destination country and packing requirements at enquiry stage.
Related Products
Other condensers and distillation apparatus from Lab Glassware Manufacturer: Condensers Friedrichs, Jacketed Coil Condensers, the full Glass Condenser range, and Laboratory Glass Condenser category.
Request a Quote
Ready to order the Angled Cold Trap for your laboratory, institutional or export order? Contact Us for a quotation, or visit the Tenders page for bulk and institutional procurement.
Last updated: September 2026.
 (1).png)