Lamp Holder E27 Base

Product Code : SCL-EI-10670

Lab Glassware Manufacturer, based in Ambala, Haryana, has been manufacturing and exporting laboratory and physics teaching equipment since 1982, supplying schools, colleges, and research institutions across India and to international buyers including Sweden, Norway, Denmark, and Finland in the Northern Europe region. The E27 Lamp Holder Base is a physics and electronics laboratory component used for holding an E27 lamp in supervised electrical circuit, light-source, and load-demonstration experiments.

Quick answer: the E27 Lamp Holder Base is a socket module built for the larger E27 lamp fitting, letting teachers and students use a compatible lamp as a visible load in classroom circuit-building experiments. Voltage rating, wattage limit, and lamp inclusion should be confirmed with Lab Glassware Manufacturer before ordering, and the holder should only be used with a supervised, confirmed low-voltage supply unless separately rated and certified for mains use.

E27 Lamp Holder Base – Specifications

Key Features

• E27 socket format for E27 lamp compatibility, final fitment to be confirmed
• Suited to school physics and basic electronics circuit experiments
• Visible load demonstration lets students observe circuit operation through lamp illumination
• Can be used with compatible plug-in boards or circuit systems where fitment is verified
• Reusable classroom component for repeated supervised practicals
• Safe operation depends on confirmed wattage, insulation, and terminal condition

What Is Included

Depending on the configuration ordered, the kit may include the E27 lamp holder base, an E27 lamp, a switch, terminals, a plug-in base, connecting leads, an instruction sheet, and a storage box or certificate. Confirm the exact contents with Lab Glassware Manufacturer before ordering.

Applications and Uses

• Building simple lamp circuits in school physics labs
• Demonstrating open and closed electrical circuits
• Showing series and parallel lamp connections
• Using a lamp as a visible load in low-voltage experiments
• Studying switch action, current flow, and brightness change
• Supporting STEM electricity activities and electronics trainer lessons

How to Use the E27 Lamp Holder Base

1. Confirm the rated voltage, maximum lamp wattage, socket type, and terminal layout before use.
2. Place the holder on a dry, stable, insulated laboratory bench.
3. Inspect the socket, housing, terminals, leads, and insulation for damage.
4. Insert only a compatible E27 lamp within the confirmed wattage rating.
5. Connect the holder into the circuit according to the approved experiment diagram.
6. Use a suitable power supply and switch on the circuit under teacher supervision.
7. Observe lamp brightness, switch action, or circuit behaviour as required.
8. Switch off the supply before removing the lamp or changing connections.

Safety note: do not connect this product to mains electricity unless its voltage rating, insulation, enclosure, terminals, and certification are verified for mains use. Use dry hands, insulated leads, correct lamp wattage, and supervised low-voltage circuits for classroom work.

Care and Maintenance

• Store the holder dry and away from dust, moisture, and heat
• Keep lamp contacts and terminals clean for reliable electrical connection
• Do not overtighten lamps, force damaged bulbs, or use cracked lamp holders
• Remove from use if insulation cracks, terminals loosen, overheating marks appear, or the socket becomes unstable

E27 vs E10 Lamp Holder Base

Lab Glassware Manufacturer supplies lamp holders in more than one base size for circuit-building experiments. This E27 Lamp Holder Base takes the larger E27 fitting, commonly used with bigger classroom demonstration lamps, while the E10 lamp holder on base takes the smaller E10 miniature screw fitting more typical of low-voltage trainer-board bulbs. Schools should choose the base size that matches the lamps already in use, and can combine either holder with other plug-in circuit board components for a complete circuit-building set.

Why Choose Lab Glassware Manufacturer

Lab Glassware Manufacturer has been manufacturing and exporting laboratory glassware, scientific instruments, physics and electronics teaching equipment, and STEM models from Ambala, Haryana since 1982. Its product range supports physics lab equipment, electronic instruments, general lab equipment, and school lab equipment, supplied to schools, colleges, universities, and export buyers across India and internationally, including buyers in Sweden, Norway, Denmark, and Finland. Manufacturing practices are stated by the company to align with ISO 9001 and ISO 13485 (verify current certification status before ordering).

Frequently Asked Questions

What is an E27 Lamp Holder Base used for?
An E27 Lamp Holder Base is used to hold an E27 lamp in educational circuit experiments and light-source demonstrations.

What does E27 mean?
E27 refers to the lamp-holder/base format. Only lamps that match the confirmed E27 socket and electrical rating should be used.

Does it include a lamp?
Lamp inclusion is not confirmed. The bulb or lamp should be listed only after checking the final supplied product configuration.

What voltage can it handle?
The voltage rating is not confirmed. Voltage and wattage values should be added only after checking the product label, datasheet, or supplier confirmation.

Can students use it for simple circuits?
Yes. It is suitable for supervised school and college circuit experiments when used with safe power supplies and correct lamp ratings.

Can it be connected to mains supply?
Do not connect it to mains electricity unless the holder, insulation, terminals, enclosure, and certification are verified for mains operation.

Related Products

• Lamp Holder on Base, E10
• Plug-in Board for Building Components
• Incandescent Bulb

Request a Quote

For pricing, bulk institutional supply, or tender submissions on the E27 Lamp Holder Base and related electronic instruments, please contact us or visit our tender page.

Last updated: September 2026