Air cushion track blower with hose Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-PLE-10424
The air cushion track blower with hose is a physics laboratory accessory used to supply airflow to an air track for low-friction motion experiments. It is designed for schools, colleges and STEM laboratories where students study velocity, acceleration, momentum, collisions and conservation of energy.
Product Description
The Air Cushion Track Blower with Hose from Lab Glassware Manufacturer provides the airflow required to operate a compatible air cushion track. When connected to a suitable air track, the blower sends air through the track holes, forming a thin air layer that allows gliders to move with very low friction.
This accessory is suitable for teacher demonstrations and supervised student practicals in mechanics and dynamics. Exact blower power, airflow rate, hose length, hose diameter, voltage, plug type, noise level and compatible air-track model should be confirmed before final catalogue publication or tender submission.
Key Features
- Designed to supply airflow to a compatible air cushion track.
- Includes hose connection for carrying air from blower to track.
- Supports low-friction motion experiments using air-track gliders.
- Useful for velocity, acceleration, momentum and collision practicals.
- Suitable for school physics labs, college labs and STEM classrooms.
- Helps demonstrate near-frictionless linear motion under controlled conditions.
- Blower rating, hose size and compatibility must be confirmed before publication.
Technical Specifications
Standards / CertificationsNo certification confirmed. Add only if verified by datasheet or compliance document.
|
Specification |
Detail |
|
Product Name |
Air Cushion Track Blower with Hose |
|
Brand |
Lab Glassware Manufacturer |
|
Product Category |
Physics Lab Equipment / Dynamics and Air Track Accessories |
|
Primary Keyword |
air cushion track blower with hose |
|
Secondary Keywords |
air track blower, blower for air cushion track, air track hose, physics air track blower, low friction track blower, dynamics lab blower, school physics air track accessory, glider track air source |
|
Blower Type |
Air source blower for compatible air cushion track |
|
Intended Users |
Schools, colleges, physics laboratories, STEM labs, teachers, distributors and institutional buyers. |
What's Included in the Kit
- Air cushion track blower main unit
- Flexible air hose
- Hose connector or fitting
- Power cord or adapter
- Instruction sheet or experiment guide
Applications / Uses
- Supplying airflow to a linear air track or air cushion track.
- Demonstrating low-friction motion using gliders.
- Studying velocity, acceleration and Newton’s laws of motion.
- Supporting elastic and inelastic collision experiments.
- Comparing low-friction air-track motion with roadway systems such as 2.2m Aluminum Roadway.
- Building motion experiments with timing accessories such as Fork Light Barrier.
How to Use the Air Cushion Track Blower with Hose
- Place the blower on a dry, stable surface near the air cushion track.
- Check that the hose, connector and blower inlet are clean and undamaged.
- Connect one end of the hose to the blower outlet.
- Connect the other end of the hose to the air inlet of the compatible air track.
- Switch on the blower using the approved power supply.
- Adjust airflow if the blower has a control setting.
- Place the glider on the track and check that it moves smoothly on the air cushion.
- Use suitable timing or motion-measurement accessories to record experimental data.
Safety note: Use only the confirmed voltage and approved power connection. Keep the blower away from liquids, blockages, loose paper and unattended operation.
Care & Maintenance
- Keep the blower vents clear of dust and obstruction.
- Inspect the hose for cracks, kinks or loose fittings before use.
- Do not pull the blower by the hose or power cord.
- Store the blower and hose dry after every practical session.
Why Choose Lab Glassware Manufacturer
Lab Glassware Manufacturer supplies laboratory glassware, scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models and STEM models. The brand supports schools, colleges, universities, distributors and export buyers with educational laboratory products. Its physics range includes motion and dynamics equipment such as PAStrack Roadway 1m and Physics Lab Equipment. Buyers should confirm blower rating, hose dimensions, plug type and track compatibility before bulk ordering.
Frequently Asked Questions
What is an air cushion track blower with hose used for?
An air cushion track blower with hose is used to supply airflow to a compatible air track so gliders can move with very low friction.
Does the blower include the air track?
Air-track inclusion is not confirmed. Add track details only after checking whether the final supply is blower-only or a complete air-track kit.
What is the hose length?
The hose length is not confirmed. Add hose length and diameter only after checking the final product specification.
Is this suitable for school physics labs?
Yes. It is suitable for supervised school and college physics laboratories studying motion, momentum, collisions and low-friction dynamics.
What voltage does the blower use?
The voltage and power rating are not confirmed. Add electrical details only after checking the final datasheet or product label.
Can it be used with any air track?
It should be used only with compatible air tracks. Confirm hose fitting, airflow requirement and inlet size before use.
For more motion, dynamics and classroom physics apparatus, explore the Physics Lab Equipment category from Lab Glassware Manufacturer.
Recommended Product Image ALT Text
- Air cushion track blower with hose for school physics low friction experiments
- Air track blower and hose for glider motion and collision practicals
- Physics lab air source blower for linear air cushion track experiments
.jpg)
.png)
 (1).jpg)
.png)
 (1).jpg)
.jpg)
.jpg)