Plug-in power supply 24 V / 0.7 A AC Manufacturer,Supplier and Exporter in India

Product Code : SCL-PLE-10472

The plug-in power supply 24 V / 0.7 A AC is a laboratory electrical accessory used for providing low-voltage alternating current to compatible physics, electronics, and classroom experiment devices. It is suitable for school labs, college laboratories, STEM classrooms, and training institutes that require a compact plug-in AC power source.

Product Description

The Lab Glassware Manufacturer plug-in power supply 24 V / 0.7 A AC is designed to supply a fixed 24 V AC output with a current rating of 0.7 A for compatible educational apparatus. It is useful where a low-voltage AC source is required for demonstration circuits, teaching modules, electromagnetic devices, lamps, coils, or experiment accessories.

This power supply is intended for supervised laboratory use. It helps teachers and lab technicians provide a defined electrical output without using open wiring or improvised power sources. Compatibility must always be checked before connecting it to any device.

Key Features

• Provides 24 V AC output for compatible laboratory and classroom devices.
• Rated current of 0.7 A for low-power educational experiment setups.
• Plug-in design helps reduce loose wiring during supervised lab use.
• Suitable for physics labs, electronics labs, STEM classrooms, and training institutes.
• Useful for compatible electromagnetic, timing, circuit, and demonstration accessories.
• Supports safer low-voltage operation compared with direct mains-powered experiments.
• Suitable for institutional procurement, lab setup, and export supply requirements.

Technical Specifications

What's Included in the Kit

• 1 plug-in power supply 24 V / 0.7 A AC
• Output lead or connector
• Instruction sheet or technical data sheet

Applications / Uses

• Supplying 24 V AC to compatible physics laboratory apparatus.
• Powering suitable electromagnetic starting devices or low-voltage accessories.
• Supporting electronics and electrical demonstration circuits.
• Using with compatible coils, lamps, modules, or teaching equipment.
• Providing a fixed low-voltage AC source for supervised classroom experiments.

How to Use the Plug-in Power Supply 24 V / 0.7 A AC

1. Check that the experiment device requires 24 V AC and does not exceed 0.7 A current draw.
2. Confirm the input voltage and plug type before connecting the power supply to mains power.
3. Connect the output lead to the compatible laboratory apparatus.
4. Switch on the mains supply only after all connections are secure.
5. Run the experiment under teacher or lab technician supervision.
6. Switch off and unplug the power supply after completing the experiment.
7. Allow the unit to cool if it becomes warm during extended use.

Safety note: Do not connect this unit to equipment requiring DC output, higher current, or a different voltage. Do not open the enclosure, short the output terminals, or use the power supply with wet hands or damaged cables.

Care & Maintenance

• Keep the power supply dry and away from chemical spills.
• Inspect the plug, cable, and connector before each laboratory session.
• Store the unit in a clean, dry cabinet after use.
• Do not pull the cable to disconnect the unit; remove it by holding the plug body.

Why Choose Lab Glassware Manufacturer

Lab Glassware Manufacturer supplies laboratory glassware, scientific instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models for educational and institutional users. The brand supports schools, colleges, universities, research laboratories, tenders, and export customers with practical laboratory products.

For electrical and physics laboratory requirements, buyers can source related products through the Physics Lab Equipment, General Lab Equipment, Laboratory Glassware, and complete product catalogue pages.

Suggested Product Image ALT Text

• Plug-in power supply 24 V AC 0.7 A for physics lab experiments
• 24 V AC laboratory power supply for school electronics practicals
• Plug-in AC adapter for compatible physics and STEM lab apparatus

Frequently Asked Questions

What is a plug-in power supply 24 V / 0.7 A AC used for?

It is used to provide 24 V AC output to compatible low-voltage laboratory devices, physics apparatus, and electronics teaching modules.

Is this power supply suitable for school physics labs?

Yes. It is suitable for supervised school and college laboratory use when the connected apparatus is rated for 24 V AC and within 0.7 A current draw.

Can this power supply be used for DC equipment?

No. This model provides AC output. It should not be used with devices that require DC unless a compatible rectifier or conversion setup is specified by the experiment design.

What is the output rating of this power supply?

The output rating is 24 V AC with a current rating of 0.7 A.

What input voltage does it require?

The input voltage is [confirm]. Buyers should verify mains input rating and plug type before procurement or use.

Does this product include connecting leads?

The included accessories are [confirm]. Output lead, connector type, and cable details should be checked before purchase.

For complete electrical and physics classroom setups, explore more physics lab equipment from Lab Glassware Manufacturer.